77066 Trakrite Camber Gauge
A magnetic gauge that attaches to the hub or disc brake for accurate checking of the castor and camber angle. Indicates the correct adjustment to maintain proper wheel alignment and even tyre wear. Particularly useful after dismantling and re-assembling of the suspension to maintain the correct camber setting. The spirit level has a graduated camber scale from -6 to +6 the tool is precise and easy to read. There is a camber adjustment knob on the back and a spirit level on the front for accurate setting up of the tool.
- Magnetic gauge attaches to the hub or disc brake. Outside diameter: 55mm; 130mm total length.
- Graduated from -6 to +6. With a 65mm wide spirit level window for easy to read camber comparison readings.
- A useful tool to maintain the correct camber setting after dismantling and re-assembling the suspension.
- Ideal for comparison side to side after curbing or accidental suspension damage and can be used to check angles for comparison on any adjustable components.
- Supplied in a fitted, blow mould storage case (160 x 130 x 70mm) For easy attachment to alloy wheels use Trackrite Camber Bar, Part No. 77137.
TSP: £69.64 ex VAT £83.57 inc VAT
Mesure l'angle de carrossage sur le moyeu de roue ou le disque de frein et permet le réglage afin de maintenir le parallélisme correct des roues et d'assurer une usure des pneus uniforme. Un outil utile pour maintenir le réglage du carrossage correct après le démontage et le remontage de la suspension.
- La jauge magnétique se fixe sur le moyeu ou le disque de frein. (Diamètre extérieur de 55 mm, 130 mm de longueur totale)
- Gradué de -3 degrés à +3 degrés.
- Un outil utile pour maintenir le réglage du carrossage correct après le démontage et le remontage de la suspension.
- Livré dans un coffret de rangement.
- Permet d'éviter des réparations onéreuses et des temps d'arrêt.
TSP: £69.64 ex VAT £83.57 inc VAT
Meet de camberhoek op de wielnaaf of remschijf en maakt afstellen mogelijk om een goede wieluitlijning en gelijkmatige bandenslijtage te behouden. Een handig gereedschap om de juiste wielvluchtinstellingen te behouden na de ontmanteling en hermontage van de vering.
- Magnetsiche meter om op de naaf of remschijf te plaatsen.
- Meet van -3° tot +3°
- Een onmisbaar werktuig om het camber terug uit te lijnen na vervanging vering.
- Met opbergdoosje.
- Helpt het voorkomen van dure reparaties en stilstand.
TSP: £69.64 ex VAT £83.57 inc VAT
Press Release
Trakrite Camber Gauge
This new tool from Gunson measures the Camber and Caster angle on the wheel hub or brake disc and allows adjustment to maintain correct wheel alignment and even tyre wear.
Camber is defined as the inward or outward tilt of a wheel at the top relative to the vertical position.
The Caster angle is the angle between the vertical and the inclination of the king pin when viewed from the side of the wheel.
This simple tool can save expensive down time and allows the strut to be returned to the original position or to check the amount of camber change before re-installing.
Simple solutions for technical problems.
For further information on Gunson or hi-res image contact the Marketing Department on 01926 818196 or e-mail marketing@toolconnection.co.uk
