77137 Trakrite Camber Bar

EU Registered Design Product Video available

Designed for use with the Gunson 77099 and 77066 with the wheels on and the vehicle sitting on the ground

  • The camber bar is fully adjustable for wheels up to 18 inch in diameter and designed to hang on the tyre giving hands free operation.
  • Where the vehicle wheel arch is too low for the camber bar to hang on the tyre it can still be used without the top bracket (held in place by hand).
  • For car and light commercial use.
  • Ideal for quick checking of camber, caster and KPI when used with Gunson 77099/77066.
  • EU Registered Design.
TSP: £73.06 ex VAT £87.67 inc VAT

Designed for use with the Gunson 77099 and 77066 with the wheels on and the vehicle sitting on the ground

  • Die Sturzeinstellhilfe ist für Räder bis 18 Zoll Durchmesser vollständig verstellbar. Für die freihändige Funktion hängt sie am Reifen.
  • Ist das Radhaus des Fahrzeugs zu niedrig, um die Sturzeinstellhilfe am Reifen einzuhängen, kann sie trotzdem ohne die obere Halterung verwendet werden (von Hand gehalten)
  • Für Autos und leichte Nutzfahrzeuge
  • Ideal für die schnelle Überprüfung von Sturz, Nachlauf und Spreizungswinkel bei Verwendung mit Gunson 77099/77066
  • Entwickelt in Großbritannien
TSP: £73.06 ex VAT £87.67 inc VAT

Designed for use with the Gunson 77099 and 77066 with the wheels on and the vehicle sitting on the ground

  • La barre de carrossage est complètement ajustable pour des roues allant jusqu'à 18 pouces de diamètre et est conçue pour s'arrimer sur le dessus de la roue, permettant à l'utilisateur de bénéficier de mains libres
  • Lorsque l'arc de roue est trop bas, le crochet de la barre peut être démonté et la barre positionnée à la main
  • Convient pour voiture et fourgon/van
  • Idéal pour contrôler la chasse et le carrossage
  • Conçu en Angleterre
TSP: £73.06 ex VAT £87.67 inc VAT
 Buy Locally

Useful Downloads


Press Release
New from Gunson: the Trakrite Camber Bar

The new Trakrite camber bar (part number 77137) is a registered design and allows either of the Gunson camber gauges to be used with the wheels on the vehicle and the vehicle sitting on the ground. No problem usually with steel wheels but the magnetic base of the gauge will not clamp onto alloy wheels!

The Trakrite camber bar solves this problem. It is assembled in seconds and full instructions are included. It is easy to adjust and use; the top bracket allows for adjustment to the profile of the tyre, then adjust the wheel spacers to the top and bottom edges of the wheel rim — this now gives a solid metal mounting base to mount either of the Gunson camber gauges ( Camber Gauge 77066 or the Magnetic Camber, Castor & King-pin gauge 77099).

When the gauge is levelled and set up, the camber angle (negative or positive) can be clearly read from the gauge. If the wheel arch is too low and there is not enough clearance for the camber bar to hang onto the tyre, the camber bar can still be used by removing the top bracket and holding in place by hand.

Designed by Gunson in the UK, the Trakrite Camber Bar is available now from your local Gunson stockist.



Buy Online from